{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
NC high-pressure vice HiPo Clamp with power intensifier 160
Article no.: 360465 160
Article code:
Product details
Technical Data
| Series | HiPoClamp | |
| Version | Zero point clamping system | |
| Clamping force up to maximum | 60 kN | |
| Weight | 65 kg | |
| Overall length L | 645 mm | |
| Base body length a | 560 mm | |
| Base body width B | 160 mm | |
| Clamping range b | 17 mm - 263 mm | |
| Base body height c -0.02 | 115 mm | |
| Clamping range d | 187 mm - 433 mm | |
| Jaw height h | 49.8 mm | |
| Longitudinal slot l H7 | 20 mm | |
| m ±0.02 | 234 mm | |
| Cross-slot n H7 | 20 mm | |
| o −0.02 | 40 mm | |
| Slot pitch p H7 | 20 mm | |
| r ±0.015 | 164 mm | |
| s − 0.02 | 70 mm | |
| t | 164 mm | |
| Colour code for suitable accessories | HiPo | |
| Type of product | Machine vice |
Identification numbers & Classifications
| Article number | 360465 160 | |
| EAN / GTIN | 4045197777911 |
Description
Version:
- Pairing accuracy 0.02 mm.
- Alignment dimensions compatible with other manufacturers.
- Universal design accepts wide variety of jaw systems.
- Slides induction hardened.
- Fully enclosed spindle (minimises cleaning requirement).
- Tapped holes on each side for workpiece backstop.
- Including holes 18M16 for zero point clamping system pitch 200 mm.
- All faces apart from the end face ground: Can be used horizontally or laterally.
- Angled gear drive can be attached.
- Fully enclosed and nitrided spindle.
- Tapped hole for workpiece backstop.