{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Drytec® carbide circular saw blade ⌀ 355×25.4 mm for thin-walled material, Number of teeth: 90
Article no.: 078237 90
Article code:
New product
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | unsuitable | |
| Series | Drytec® | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | HM-Kreissägeblatt Drytec® | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 355 mm | |
| Diameter of mounting hole | 25.4 mm | |
| Cutting width | 2.2 mm | |
| ISO milling cutter type | Shell end mills | |
| Tooth form | Wz | |
| Number of cutters (peripheral side) | 90 | |
| Tooth pitch | 12.39 mm | |
| Corner version | sharp-edged | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Coating | coated | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade |
Identification & Classification
| Article number | 078237 90 | |
| EAN / GTIN | 4260052460146 | |
| Manufacturer number | 600570 | |
| Manufacturer/responsible person | JEPSON Power GmbH, Ernst-Abbe-Straße 5, 52249 Eschweiler, Germany, www.jepson.de |
Description
Version:
Carbide-tipped circular saw blade for precise cutting.
- Safety at work: Thin-walled, low-vibration, reduced noise.
- Extremely long working life.
- High-quality cutting.
- Can be resharpened 5×.
- General-purpose use for steel, plastic, and non-ferrous metals (not No. 078236).
Note:
Other special saw blades for aluminium, stainless steel, for example, are available on request.