{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Worktop of beech marine ply with edge protection Depth 700 mm
Article no.: 937022
Article code:
Click to enlarge image
50 mm thick, like No. 933575 but with additional metal edge protector at the front.
Description
Version:
Holes are provided on the underside of the worktop for securing drawer units and support legs (KOMBI range).
Worktop for general requirements. Made of peeled beech veneer, with multiple cross layers, glued, non-warping, and waterproof. The edges are smoothed, the surface is sanded and sealed with clear UV varnish. Beech marine ply is resistant to sprayed water and to dirt, and largely resistant to oil, grease, solvents, and chemicals. (These do however affect the appearance of the surface). With stainless sheet metal covering.
With additional 1-side metal edge protector on the front.
Inlaid metal edge protection strip 50×50×4 mm.
Worktop for general requirements. Made of peeled beech veneer, with multiple cross layers, glued, non-warping, and waterproof. The edges are smoothed, the surface is sanded and sealed with clear UV varnish. Beech marine ply is resistant to sprayed water and to dirt, and largely resistant to oil, grease, solvents, and chemicals. (These do however affect the appearance of the surface). With stainless sheet metal covering.
With additional 1-side metal edge protector on the front.
Inlaid metal edge protection strip 50×50×4 mm.
Note:
Special dimensions available on request. Up to max. 2500 mm length and 1080 mm width available in a single piece.