{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide end torus cutter HPC 8 mm
Article no.: 206262 8
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: h9
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | h9 | |
| No. of teeth Z | 5 | |
| Helix angle | 15 degrees | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.5×D for side milling | |
| Shank | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Dimension ap max transverse | 0.5 mm | |
| Programming radius | 1 mm | |
| Flute length Lc | 4.8 mm | |
| Overhang length L1 incl. recess | 24 mm | |
| minimum shank recess dia. D5 | 7 mm | |
| maximum shank recess dia. D6 | 7.9 mm | |
| Overall length L | 70 mm | |
| Shank ⌀ Ds | 8 mm | |
| Setting angle κ | 15 degrees | |
| Feed fz in steel < 900 N/mm2 | 0.12 mm | |
| Colour ring | green | |
| Type of product | End torus mill |
Identification numbers & Classifications
| Article number | 206262 8 | |
| EAN / GTIN | 4062406279837 |
Application Table
P
175
P
170
P
155
P
140
P
130
M
100
M
95
Description
Version:
Special centre cutting edge geometry for traverse milling at very high feed rates.
Tolerance: Corner radius R1 = ±0.01 mm.
Tolerance: Corner radius R1 = ±0.01 mm.
Application:
For copy and traverse milling over the full range of hard machining under HPC/HSC conditions.
Using special milling strategies very high rates of metal removal can be achieved.
Using special milling strategies very high rates of metal removal can be achieved.
Note:
Tools can be reground.
With conically increasing recess to guarantee stability at long overhangs.
With conically increasing recess to guarantee stability at long overhangs.