{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Base jaw set, 3 pieces, hardened 160 mm
Article no.: 314000 160
Article code:
Product details
Technical Data
| for chuck type | 160 mm | |
| Length L | 65 mm | |
| Slot width D +0.01 | 12.68 mm | |
| Tenon width B1 −0.05 | 7.94 mm | |
| suitable for colour code | Röhm geared scroll chucks and jaws | |
| Thread | M8 | |
| Type of product | Gear scroll chuck jaws |
Identification numbers & Classifications
| Article number | 314000 160 | |
| EAN / GTIN | 4019208034119 | |
| Manufacturer number | 107503 |
Description
Application:
For fitting hardened reversible jaws or soft top jaws.
Suitable for:
Note:
- Jaws can generally be renewed in the chuck as long as the guide in the body is not worn out.
- Top, turning, and drilling jaws bought subsequently must be ground in the chuck for radial and axial run-out.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|
|---|---|---|
Base jaw set, 3 pieces, hardened 160 mm
on request
In stock
15 pieces in stock
|
on request
In stock
117 pieces in stock
|
|
| for chuck type | 160 | 160 |
| Thread | M8 | M10 |
| Length L | 65 | 65 |
| suitable for colour code | Röhm geared scroll chucks and jaws | HOLEX geared scroll chucks and jaws |
| Slot width D +0.01 | 12.68 | |
| Tenon width B1 −0.05 | 7.94 | |
| Type of product | Gear scroll chuck jaws | Gear scroll chuck jaws |