{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Plunge milling cutter 90°, with threaded shank, ⌀ D / number of teeth Z: 40/3mm
Article no.: 211811 40/3
Article code:
- Setting angle κ: 90
- Milling application: Circular milling; Ramping
- Through-coolant: yes
- Machining strategy: MTC
- Tool exchange: PowerCard
Product details
Technical Data
| Cutting edge ⌀ DC | 40 mm | |
| Number of cutting edges Z | 3 | |
| Shank type | with threaded shank | |
| Setting angle κ | 90 degrees | |
| Milling application | Circular milling; Ramping | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| ⌀ D3 | 34 mm | |
| ⌀ D1 h6 | 17 mm | |
| ⌀ D2 | 29 mm | |
| Overall length Ltot | 47 mm | |
| Mounting thread M | M16 | |
| Circular interpolation milling ⌀ Dmin | 74 mm | |
| Circular interpolation milling ⌀ Dmax | 78 mm | |
| Circular interpolation milling ap | 8 mm | |
| Ramping angle αmax | 5.65 degrees | |
| Ramping length L for αmax | 30.34 mm | |
| suitable indexable insert | VCG. 2205 | |
| Pack of insert screws | 219800 (20IP; 5.7 Nm) | |
| Type of product | Plunge mill |
Identification numbers & Classifications
| Article number | 211811 40/3 | |
| EAN / GTIN | 4045197715074 | |
| Manufacturer number | 211811 40/3 |