{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Solid carbide HPC deep hole drill plain shank DIN 6535 HA 30×D, DLC, ⌀ DC h7: 2mm
Article no.: 123595 2
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Version: 30×D
- Tolerance nominal ⌀: h7
- Number of cutting edges Z: 2
Product details
Technical Data
| Nominal ⌀ DC | 2 mm | |
| Coating | DLC | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Version | 30×D | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 135 degrees | |
| recommended maximum drilling depth L2 | 67 mm | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | yes, with 40 bar | |
| Machining strategy | HPC | |
| Pilot drill required | yes, pilot drill | |
| Flute length Lc | 70 mm | |
| Overall length L | 115 mm | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in aluminium short-chipping | 0.08 mm/rev. | |
| Colour ring | yellow | |
| Type of product | Jobber drill |
Identification & Classification
| Article number | 123595 2 | |
| EAN / GTIN | 4045197354822 | |
| Manufacturer number | 123595 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
120
N
150
N
110
N
120
N
95
N
70
N
65
N
55
N
65
N
70
N
80
N
65
N
65
Description
Version:
Spiral fluted, with 6 guide chamfers and internal cooling channels. New generation of high performance deep hole drills in the HPC range. With 135° point angle and special h7 cutting edge tolerance for optimum generation of a deep hole. High roundness and alignment accuracy of the deep hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For process reliability when using the 16×D deep hole drill, prior centring with No. 121068 – 121121 or 4×D pilot drilling operation with pilot drill No. 122606 is necessary. For deep holes greater than 20×D, a pilot hole with maximum drilling depth with pilot drill No. 122606 is absolutely essential.The generation of a pilot hole improves process reliability.
For process reliability when using the 16×D deep hole drill, prior centring with No. 121068 – 121121 or 4×D pilot drilling operation with pilot drill No. 122606 is necessary. For deep holes greater than 20×D, a pilot hole with maximum drilling depth with pilot drill No. 122606 is absolutely essential.The generation of a pilot hole improves process reliability.