{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Machine tap HSS-E-PM Form B 6HX, TiCN, M: M10
Article no.: 132170 M10
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Chip evacuation in the cutting direction.
Click to enlarge image
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: DIN 371
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiCN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | DIN 371 | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | Plain shank with h9 | |
| Through-coolant | no | |
| Application for type of drilling | up to 2×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.5 mm | |
| Thread ⌀ | 10 mm | |
| Type of threading tool | Machine tap for dynamic machining | |
| Number of clamping slots | 3 | |
| Colour ring | blue | |
| Number of cutting edges Z | 3 | |
| Thread depth | 20 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132170 M10 | |
| Manufacturer number | 132170 M10 |
Application Table
N
28
P
27
P
23
P
23
M
9
M
7
N
28
Description
Version:
Strong spiral point.
Guide section with oil grooves, but without chip flutes. For use with emulsion (fat content minimum 8%).
Guide section with oil grooves, but without chip flutes. For use with emulsion (fat content minimum 8%).
Note:
NEW GENERATION AVAILABLE!
Recommended successor product is No. 132180.
Recommended successor product is No. 132180.