{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Master Steel SlotMachine solid carbide roughing end mill HPC 14 mm
Article no.: 205552 14
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Milling profile: NR
- Spacing of the cutters: unequal spacing
- Cutting width ae for milling operation: Full slot cutting depth 1×D; 0.4×D for side milling
Product details
Technical Data
| Series | Master Steel | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Milling profile | NR | |
| Spacing of the cutters | unequal spacing | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.4×D for side milling | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 205552 14 | |
| EAN / GTIN | 4045197958990 |
Application Table
P
200
P
180
P
160
P
140
P
110
M
50
M
35
K
200
Description
Version:
With a new-type knurled profile, optimised for higher feed rates. Improved cutting edge protection thanks to slight edge honing. Tremendous bending strength due to the use of ultra-fine grain substrate.
Advantage:
The tool geometry produces particularly tightly rolled swarf that is discharged via flat chip breaker recesses. As a result, the tool maintains an extremely stable core. Plunge angle of up to 10° possible thanks to generous recess on the front face.
Application:
For roughing machining, particularly suitable for full-slot machining.