{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Face reamer H7 7 mm
Article no.: 162825 7
Article code:
- Tool material: HSS E
- Standard: Manufacturer’s standard
- Through-coolant: no
- Shank: Parallel shank to e9
- Application for type of drilling: for blind hole and through hole
Product details
Technical Data
| Nominal ⌀ DC | 7 mm | |
| Coating | uncoated | |
| Tolerance | H7 | |
| Tool material | HSS E | |
| Standard | Manufacturer’s standard | |
| Through-coolant | no | |
| Shank | Parallel shank to e9 | |
| Application for type of drilling | for blind hole and through hole | |
| Plunge cutting | 2.5 mm | |
| Flute length Lc | 22 mm | |
| Overhang L1 | 69 mm | |
| Overall length L | 109 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 7 mm | |
| Feed f in steel < 900 N/mm2 | 0.15 mm/rev. | |
| Reaming oversize in diameter | 0.1 mm - 0.2 mm | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identification numbers & Classifications
| Article number | 162825 7 | |
| EAN / GTIN | 4062406117245 |
Application Table
N
20
N
20
P
15
P
12
P
12
P
10
P
10
K
10
N
20
Description
Version:
Chucking reamer cutting on the end face to achieve the most accurate size possible. The optimised end face cutting enables a precise alignment fit of the hole that is produced. Straight flute machine chucking reamers with long flutes for optimum chip evacuation.
Application:
For production of sequential holes with alignments that exactly match. For the highest demands for straightness of holes. For reaming of through holes and right to the bottom of blind holes.
Note:
No. 162830 Configurable reamers are available in the diameter range from 2.200 to 12.220 mm and for any choice of fit.