{{ name }}
Cikkszám {{ combinedCodeWithHighlight }}
Cikkszám:
EAN / GTIN:
Gyártó száma:
3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H, Yellow, 457 mm x 23 m, 0.5 mm
Cikkszám: 7100152066
Cikkszám:
Kérjük, vegye figyelembe a szállítási időt és a korlátozott tanácsadást:
Ezt a terméket közvetlenül a gyártótól rendeljük meg Önnek, mivel nem része a fő kínálatunknak, és nem tartjuk raktáron.
InfoTermékadatok
Technikai adatok
| Termék fajtája | Ragasztószalag |
Azonosító számok és osztályozások
| Cikkszám | 7100152066 | |
| EAN / GTIN | 05900422102489 | |
| Gyártó száma | 7100152066 |
Leírás
Kivitel:
Product Colour: Yellow
0.51 mm thickness
Medium soft
Overall Width: 457 mm
Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
0.51 mm thickness
Medium soft
Overall Width: 457 mm
Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Leírás:
Mount your photopolymer plate to print cylinders with 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1320H. Our 0.51 mm yellow, double coated foam tape has the air release feature with high plate side adhesion. It is used for high speed printing of combination work when halftone areas exceed solids.
Jellemző:
Yellow, flexo plate mounting tape has air release feature with high plate side adhesion
For the combination of screen and spot printing// for the combination of screen and spot printing
medium soft// medium soft
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
For the combination of screen and spot printing// for the combination of screen and spot printing
medium soft// medium soft
Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
Figyelem:
For mounting photopolimeric plates to print cylinders or sleeves