{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Centre point CoAE for face driver, Centring tip ⌀ D: 10mm
Article no.: 327661 10
Article code:
Product details
Technical Data
| Herstellerbezeichnung | Zentrierspitze CoAE fuer Stirnseiten-Mitnehmer | |
| Länge gesamt L | 33 mm | |
| Durchmesser Kopf D | 16 mm | |
| Ausführung Zentrierspitze | fest | |
| Spitzenwinkel α | 60 Grad | |
| größter Spitzen-Durchmesser D1 | 10 mm | |
| stumpfer Kegel stirnseitig | nein | |
| Halbe Zentrierspitze | nein | |
| auswechselbare Zentrierspitzen enthalten | nein | |
| typische Verwendung | Drehen; Fräsen | |
| Gewicht | 0,112 kg | |
| Produktart | Zentrierspitze |
Identification & Classification
| Article number | 327661 10 | |
| EAN / GTIN | 4019208505459 | |
| Manufacturer number | 1341943 | |
| Manufacturer/responsible person | Röhm GmbH, Heinrich-Röhm-Straße 50, 89567 Sontheim/BRZ, Germany, www.roehm.biz |
Description
Version:
Face drivers are clamping tools used in mechanical production. They are used for transmitting torque from the machine spindle to the workpiece. The face driver (also called headstock centre) is used to clamp shafts between tips in machine tools. The complete outer contour of the workpiece can be machined using a single set-up. High concentricity requirements can be achieved by mounting on the workpiece centres.
The CoAE is a constant face driver which is manually clamped in a lathe. It is used predominantly for machining over the entire length. The components are clamped at the end face. Milling can also be performed in the same set-up. It impresses thanks to a constant clamping force, even on uneven end faces or in the case of large deviations from the orthogonality. The mounting is free of play radially. The modular design allows different centre points to be used, as well as various driver discs with a single face driver, thus allowing machining of a wide variety of geometries. The CoAE replaces the Röhm face driver CoA. Suitable for manually clamping machine tools.
The CoAE is a constant face driver which is manually clamped in a lathe. It is used predominantly for machining over the entire length. The components are clamped at the end face. Milling can also be performed in the same set-up. It impresses thanks to a constant clamping force, even on uneven end faces or in the case of large deviations from the orthogonality. The mounting is free of play radially. The modular design allows different centre points to be used, as well as various driver discs with a single face driver, thus allowing machining of a wide variety of geometries. The CoAE replaces the Röhm face driver CoA. Suitable for manually clamping machine tools.
Suitable for:
Note:
Not suitable for the old system CoA.