{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Revolving lathe centre, flattened for interchangeable heads, Morse taper: 4
Article no.: 321266 4
Article code:
Product details
Technical Data
| Morse taper | MT4 | |
| Body ⌀ D | 60 mm | |
| Reach B | 85 mm | |
| maximum radial run-out | 0,003 mm | |
| maximum speed | 10.000 min-1 | |
| for workpiece weight | 400 kg | |
| Length 1 | 74 mm | |
| L2 | 10 mm | |
| External ⌀ D1 | 14 mm | |
| suitable for colour code | K14 | |
| Push-off screw | yes | |
| Type of product | Centring drill |
Identification & Classification
| Article number | 321266 4 | |
| EAN / GTIN | 4062406572310 | |
| Manufacturer number | 321266 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Extremely slim casing, flattened on one side, for optimum access; very high concentricity due to high-end bearing; also suitable for grinding applications.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Optional extras:
Note:
Draw-off nut for NC machines to remove tip from tailstock sleeve.
Changing the inserts in the key surfaces by counter-rotation.
Changing the inserts in the key surfaces by counter-rotation.