{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre 60°, Morse taper: 2
Article no.: 320645 2
Article code:
Product details
Technical Data
| Overall length | 127 mm | |
| Head diameter | 32 mm | |
| Type of centring point | tracking | |
| Point angle | 60 degrees | |
| Largest point diameter | 15 mm | |
| Point length | 19,5 mm | |
| Mounting machine-side | MK2 | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Usable length | 64 mm | |
| Max. workpiece weight | 200 kg | |
| Maximum speed | 6.000 min-1 | |
| Maximum radial run-out | 0,005 mm | |
| Half centring point | no | |
| Replaceable centring points included | no | |
| Use | turning | |
| Weight | 0,33 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 320645 2 | |
| EAN / GTIN | 4045197773654 | |
| Manufacturer number | 320645 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
- Lightweight version with slim body.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- MT shank hardened and ground.
Point angle 60°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
Mainly used for machining small and smallest parts on all types of lathes.