{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
TNGA 160408 KB 7205 HART GARANT
Article no.: 255746 HART
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | TNGA 160408 | |
| Dry machining | suitable | |
| Oil | unsuitable | |
| Air | suitable | |
| Base form | triangular | |
| Insert width | 16 mm | |
| Blade thickness | 4,76 mm | |
| Insert version | neutral | |
| Cutting edge length | 16 mm | |
| Insert diameter | 12,7 mm | |
| Corner radius | 0,8 mm | |
| Corner angle | 60 degrees | |
| Setting angle | 0 degrees | |
| ISO-Code | TNGA 160408 | |
| Tool material | HC | |
| Machining group | H (hard materials); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | KB7205 | |
| Coating | coated | |
| Grade | KB7205 | |
| Insert thickness | 4,76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | TNGA 160408 | |
| Insert designation | TNGA 160408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H); heat-resistant super-alloys (S) | |
| Tolerance Class | G | |
| Machining method | thread processing internal / external (EGE) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Number of potential uses | 6 pcs. | |
| Weight | 4 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 255746 HART | |
| EAN / GTIN | 4045197511577 | |
| Manufacturer number | 255746 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Application Table
H
H
H
K
N
Description
Version:
High quality, high-temperature ceramic tool material for reliable operation on materials that are hard and difficult to machine.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.
Coated aluminium oxide titanium carbide ceramic for machining hard materials up to 68 HRC.