{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves Pro Cut E / Impact, Glove size: 11
Article no.: 094606 11
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Application example.
Click to enlarge image
Application example.
Product details
Technical Data
| Series | HOLEX Pro Cut E | |
| Manufacturer’s designation | Pro Cut E / Impact | |
| Guideline / labelling | CE mark | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | E | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 2 | |
| Resistance to cuts (TDM) | E | |
| Impact protection | P | |
| Material of coating, the palms of the hands | nitrile foam; polyurethane (PU) | |
| EN 388 code | 4X42EP | |
| Colour | grey; black | |
| Dry | normal line dry | |
| Type of product | gloves | |
| Area of application | cut protection | |
| Glove size | 11 | |
| Accuracy of fit | fitting | |
| Scope of application | Heavy Duty | |
| Version | five-fingered | |
| Reuse | reusable | |
| Unit | pair | |
| AQL (Accepted Quality Level) | G-II 1,0 for critical, G-II 2,5 for major, G-II 4,0 for Minor. | |
| Knitted technology (fineness) | 13G | |
| Standard | EN 388; EN ISO 21420 | |
| Backing material | HPPE fibre | |
| Coating | the palms of the hands | |
| Lined | no | |
| Characteristics | DMF free; protectors; reinforced crook of the thumb | |
| Protection category | II | |
| Overall length | 255 mm |
Identification & Classification
| Article number | 094606 11 | |
| EAN / GTIN | 4062406132941 | |
| Manufacturer number | 094606 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
HOLEX Pro Cut E. Seamless knitted cut-resistant gloves for protection against extreme cut hazards. PU nitrile foam coating for a very good secure grip even in oily and wet working environments. With reinforced thumb joint for longer life.
With additional protectors for the back of the hand in an innovative design for maximum protection and unusually high freedom of movement.
With additional protectors for the back of the hand in an innovative design for maximum protection and unusually high freedom of movement.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- For precision work in oily or wet conditions.
Reasonably foreseeable misuse
- Gloves offer no protection against chemical, microbiological, thermal, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.