{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of gloves MASTER CUT C, Glove size: 11
Article no.: 094445 11
Article code:
Product details
Technical Data
| Serie | Master Cut | |
| Sigillo di qualità e test | Oeko-Tex® Standard 100 | |
| Zona di protezione ESD (EPA) | no | |
| Area EX | no | |
| Contenuto paia | 1 paio | |
| Categoria di protezione antitaglio, EN 388 | C | |
| Versione, EN 388 | EN388:2016 | |
| Resistenza all’abrasione | 4 | |
| Resistenza al taglio (Couptest) | 3 | |
| Resistenza allo strappo | 3 | |
| Resistenza alla perforazione | 1 | |
| Resistenza al taglio (TDM) | C | |
| Protezione contro urti | non determinato | |
| Materiale rivestimento, Palmo | Schiuma di nitrile | |
| Codice EN 388 | 4331C | |
| Colore | grey; black | |
| Tipo di prodotto | Guanti | |
| Campo di impiego | Protezione antitaglio | |
| Misura dei guanti | 11 | |
| Indossabilità | Es. aderente | |
| Campo di applicazione | Precisione; Universale | |
| Chiusura | nessun | |
| Esecuzione | Cinque dita | |
| Riutilizzo | Riutilizzabile | |
| Unità | Coppia | |
| Tecnologia di lavorazione a maglia (finezza) | 18G | |
| Normativa | EN 388; EN ISO 21420 | |
| Materiale di supporto | Filo speciale | |
| Rivestimento | Palmo | |
| Con fodera | no | |
| Caratteristiche | Piega del pollice rinforzata | |
| Categoria di protezione | II |
Identification & Classification
| Article number | 094445 11 | |
| EAN / GTIN | 4062406273385 | |
| Manufacturer number | 094445 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Deutschland, www.hoffmann-group.com |
Description
Version:
GARANT Master Cut cut-resistant gloves. Close-fitting and extremely comfortable thanks to 18-gauge knit. Pleasant nitrile micro-foam coating for exceptionally good sense of touch and high level of dexterity. With reinforced thumb joint for increased working life.
Cut resistance level C, completely without glass or steel fibres.
Cut resistance level C, completely without glass or steel fibres.
Standard:
EN 388; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasions, blisters and cutting hazards. For precision work.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, thermal or electrical hazards.
- Do not wear when close to rotating machine parts.
- Do not continue using gloves following contact with sharp-edged items.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.