{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Bearing separator separately 1
Article no.: 884600 1
Copy
Article code:
Copy
Product details
Technical Data
| Manufacturer's designation | 17 | |
| Clamping range dimension A | 12 mm - 75 mm | |
| Spacing of side pins dimension B | 75 mm | |
| Connection thread for bearing extractor | M10 | |
| Type of product | Separator |
Identification & Classification
| Article number |
884600 1
Copy |
|
| EAN / GTIN |
4021176008283
Copy |
|
| Manufacturer number |
17-1
Copy |
|
| Manufacturer/responsible person | Kleinbongartz & Kaiser oHG, Heinrich-Hertz-Straße 5, 40704 HILDEN, Deutschland, www.kukko.com |
Description
Version:
Bearing separator of high-quality tool steel.
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
Separator: The quick-release semicircular jaws are symmetrically tensioned by a screw. This causes the wedge-shaped jaws to insert themselves between bearings and shaft.
Extractor: Used in conjunction with the separator to extract bearings from their seating (for this the draw bolts are screwed into the threaded holes in the separation jaws).
The semicircular separation jaws are symmetrically tensioned by a quick-release pressure spindle.
Application:
For the separation of tightly wedged ball bearings, gears, etc., if the gap is too small for normal extraction arms.