This article is no longer part of the assortment. If you are looking for an alternative, please note the links or get in contact with us.

Alternative article:

Machine tap, TiCN, G: G1/8

Article no.: 133310 G1/8

Thread size		G1/8
Coating		TiCN
Thread type		G
Flank angle		55 degrees
Tool material		HSS E
Standard		DIN 5156
Taper lead form		B
Shank		Plain shank with h9
Through-coolant		no
Application for type of drilling		up to 3×D for through holes
Cutting direction		right-hand
Thread pitch		0.907 mm
Threads per inch		28
Thread ⌀		9.73 mm
Overall length L		90 mm
Shank ⌀ D_s		7 mm
Shank square □		5.5 mm
Tapping hole ⌀		8.8 mm
Type of threading tool		Machine tap for dynamic machining
Number of clamping slots		3
Colour ring		red
Number of cutting edges Z		3
Thread depth		29.19 mm
Type of product		Tap

Article number		133310 G1/8
Manufacturer number		133310 G1/8

With spiral point.
For use with emulsion (fat content minimum 8 %).

For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).

For TOOLOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3 mm larger.