{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Presse à vis en fonte malléable TG-2K 200/100
Réf.: TG20-2K
Référence:
Veuillez noter le délai de livraison et les conseils limités:
Nous commandons cet article pour vous directement chez le fabricant, car il ne fait pas partie de notre assortiment principal et n’est donc pas en stock chez nous.
InfosDétails du produit
Caractéristiques techniques
| Material Schutzkappe | Kunststoff | |
| Produktart | Zwingen | |
| Typ Zwinge | Schraubzwinge | |
| Ausladung max. | 100 mm | |
| Spannkraft max. F | 6.000 N | |
| Spannweite max. a; b | 200 mm | |
| Material Spannarme | Temperguss | |
| Stärke Gleitschiene | 7 mm | |
| Breite Gleitschienen | 27 mm | |
| Material Gleitschiene | Stahl | |
| Gewinde Spindel | Trapezgewinde | |
| Bedienungsart | Zweihändig | |
| geeignet für | Holz | |
| mit Druckplatte | ja | |
| Spannflächen mit Schutzkappe | ja | |
| Inhalt | Einzelteil |
Identification et classification
| Référence article | TG20-2K | |
| EAN / GTIN | 4008158030029 | |
| Réf. fabricant | TG20-2K | |
| Article hors catalogue | L80030 24 | |
| Fabricant/personne responsable | BESSEY Tool GmbH & Co. KG, Muehlenwieserstraße 40, 74321 Bietigheim-Bissingen, Deutschland, www.bessey.de |
Description
Description:
- Clamping force up to 6,000 N
- High‐quality 2‐component plastic handle
- Pressure plates can be replace by hand – no tools required (from 80 mm throat depth)
- With protective caps on the clamping surfaces
- Stable profiled rail with serration
- BESSEY anti‐slip system (from 80 mm throat depth)
Feature:
- Overhead: 100 mm
- Material / surface:
- Upper and lower parts made of reinforced malleable cast iron, powder coated
- Hollow profile rail made of steel, cold drawn, galvanized
- Spindle with trapezoidal thread made of steel rolled, burnished
- Handle made of 2-component plastic
- Pressure plate made of steel, cold pressed, galvanized
- Plastic protective caps
- Rail: 27x7 mm
- Wingspan: 200 mm
Advantage:
Integrated BESSEY anti-slip system
- Maximum safety is available with the integrated BESSEY anti-slip system, when clamping with a throat depth of 80 mm or more. A set screw that is molded into the sliding arm interlocks with the serration on the rail. This effectively prevents the clamp from dislodging or slipping away.
- Both the upper and lower sections are produced from high-quality malleable iron and reinforced by shafts. The powder coating protects against corrosion and the characteristic shaft profile works as a reliable reinforcement against torsion forces.
- The BESSEY profiled rail from our own drawing plant has been especially optimised for clamps. The serration on six faces additionally prevents the clamp from slipping.
- For enhanced serviceability the pressure plate can be changed with no need for tools. It can be replaced very easily and quickly.
Application:
- Interior fittings
- Shell construction
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
Note:
- Danger warnings:
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Care instructions:
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly