{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Paroi arrière renforcée avec colonnes support, Hauteur des colonnes support: 481mm
Réf.: 928020 481
Référence:
Cliquer pour agrandir l’image
Application example
Détails du produit
Caractéristiques techniques
| Max. load capacity | 100 kg | |
| Number of cables per support column max. | 4 | |
| Number of sockets per inner side of support column max. | 2 | |
| Colour selection | GARANT colours | |
| Type of product | support column | |
| Load capacity specification | maximum | |
| Cable pass-through | yes | |
| Height adjustment interval | 50 mm | |
| Depth | 100 mm | |
| Height | 481 mm | |
| Material | sheet metal | |
| Material thickness | 1 mm | |
| Assembly | assembled | |
| Weight | 15 kg |
Identification et classification
| Référence article | 928020 481 | |
| EAN / GTIN | 4062406112264 | |
| Réf. fabricant | 928020 481 | |
| Fabricant/personne responsable | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Additional charge for positioning the support columns centrally to the workstation. For size 1500 mm, a structure of 1000 mm can be positioned centrally; for size 2000 mm, a structure of 1500 mm can be positioned centrally.
Suitable for:
Supplied with:
A reinforced rear panel is fitted to the workstation and support columns (No. 928010) are supplied ready assembled.
Note:
No. 928020 is an optional additional charge item which can only be ordered for new equipment. It cannot be retrofitted.
Support structure divider No. 928040 cannot be mounted on the reinforced back panel.
Support structure divider No. 928040 cannot be mounted on the reinforced back panel.
Warning:
Intended use
Reasonably foreseeable misuse
- Use the workbench only when in good technical condition.
- If any faults occur which may affect safety, rectify them without delay.
- Only mount components on the designated holes Exclusively use approved Hoffmann Group accessories for modifications or rebuilding.
- For work in indoor industrial environments.
- For use on dry solid floors.
- Operate only in a dry environment.
Reasonably foreseeable misuse
- Do not place or position on the workbench.
- Do not carry people.
- Not for use in areas where the floor slopes upwards or downwards.
- Do not use in explosion hazard areas.
- No do expose it to water, precipitation or contamination.
- Not for use in areas where the floor is loose or unpaved.
- Do not overload the workbench, worktop, drawers or storage shelves.
- Do not make any unauthorised modifications.