{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Outil de copiage à droite simturn AX, L2 = 15 mm, ⌀ Dmin: 8mm
Réf.: 270653 8
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | simturn AX Kopiereinsatz rechts | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Thickness of the insert S | 5 mm | |
| Length of cutting insert L | 46 mm | |
| Insert version | right-hand | |
| Tool material | HC | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | P05-P35; M05-M25; K05-K25 | |
| Coating | coated | |
| Insert thickness T | 5 mm | |
| Type of fastening for insert | C (without hole clamped from above) | |
| Interface coding for insert | ZYL | |
| Interface coding for insert according to ISO TS 13399-60 | ZYL | |
| Type of product | Cutter insert | |
| Number of teeth | 1 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Machining method | plunging (ESE) | |
| Finishing / roughing assignment | Finishing | |
| Cutting conditions | continuous | |
| Content | 1 pcs. |
Identification et classification
| Référence article | 270653 8 | |
| EAN / GTIN | 2050002078895 | |
| Réf. fabricant | A08.JCA9.A | |
| Fabricant/personne responsable | SIMTEK Präzisionswerkzeuge GmbH, Christophstraße 18, 72116 MÖSSINGEN, Deutschland, www.simtek.com |
Tableau d’application
N
400
N
240
P
180
P
130
M
100
M
70
S
40
K
110
N
210
