{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
N° cat.:
Plaquette de tournage VBMT 110308, pour finition
Réf.: 261176 CCX
Référence:
Détails du produit
Caractéristiques techniques
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Width of insert B | 5,52 mm | |
| Thickness of insert S | 3,18 mm | |
| Length of insert L | 5,52 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 11,1 mm | |
| Height of cutting edge | 3,18 mm | |
| Diameter of insert d | 6,35 mm | |
| Corner radius R | 0,8 mm | |
| Corner angle | 35 degrees | |
| Rake face chamfer width C | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 10 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 5 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | VBMT 110308 | |
| Attachment hole diameter | 2,8 mm | |
| Type of chip breaker | PP | |
| Machining group, manufacturer-specific | HOG | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | CCX | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | VB1104083N | |
| Interface coding for insert according to ISO TS 13399-60 | VB1104083N | |
| Insert designation | VBMT110308 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 25,2 g | |
| Content | 1 pcs. |
Identification et classification
| Référence article | 261176 CCX | |
| EAN / GTIN | 4960664912131 | |
| Réf. fabricant | TMJ40095 | |
| Fabricant/personne responsable | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Deutschland, www.kyocera-unimerco.de |
Tableau d’application
P
P
P
P
P
K
