{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
Käsikalvin säädettävä 30 mm
Tuote nro.: 160200 30
Tuotekoodi:
Suurenna kuvaa napsauttamalla
Suurenna kuvaa napsauttamalla
Suurenna kuvaa napsauttamalla
Parillinen hammasluku, epätasainen jaotus kaksi hammasta aina vastakkain, esim. hampaat 1 ja 5
- Tool material: HSS
- Standard: DIN 206 B
- Helix angle: 7-8
- Through-coolant: no
- Application for type of drilling: for through holes
Tuotetiedot
Tekniset tiedot
| Nominal ⌀ DC | 30 mm | |
| Coating | uncoated | |
| Tool material | HSS | |
| Standard | DIN 206 B | |
| Helix angle | 7-8 degrees | |
| Through-coolant | no | |
| Application for type of drilling | for through holes | |
| ⌀ range | 28.201 mm - 30.200 mm | |
| Flute length Lc | 124 mm | |
| Overhang L1 | 155 mm | |
| Overall length L | 247 mm | |
| Number of cutting edges Z | 10 | |
| Shank square □ | 22 mm | |
| Colour ring | without | |
| Type of product | Phillips bit |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 160200 30 | |
| EAN / GTIN | 4045197927514 |
Käyttötaulukko
N
P
P
P
Kuvaus
Version:
With left-hand helix 7 − 8° and long taper lead, more than 1/4 of the cutting length. An even number of teeth with irregular spacing for accurately round holes, free of chatter. The cylindrical ground chamfer on the plain cutting section smooths the hole and guides the reamer.
Hand reamers finish ground to match your specifications.
Hand reamers finish ground to match your specifications.
Application:
For through holes (not for blind holes). Also very suitable for interrupted holes.