{{ name }}
Tuote nro. {{ combinedCodeWithHighlight }}
Tuotekoodi:
EAN / GTIN:
Valmistajan numero:
Bimetalli-reikäsaha 38 mm
Tuote nro.: 589030 38
Tuotekoodi:
- Hammasta/tuuma: 4,5 / 5,5
Tuotetiedot
Tekniset tiedot
| Hammasta/tuuma | 4,5 / 5,5 | |
| Halkaisija | 38 mm | |
| suositeltu kierrosluku teräs | 230 min-1 | |
| suositeltu kierrosluku INOX | 115 min-1 | |
| suositeltu kierrosluku alumiini | 345 min-1 | |
| Tuotetyyppi | Reikäsaha |
Tunnistenumerot ja Luokitukset
| Tuotekoodi | 589030 38 | |
| EAN / GTIN | 082472300246 | |
| Valmistajan numero | 3002424L |
Kuvaus
Version:
Robust unbreakable construction with variable toothing on flexible special steel body (bimetal). The reinforced stiff base is equipped with thread and drive pin holes (from ⌀ 32 mm) for secure mounting on the arbor. The high quality of the HSS teeth, the teeth geometry and the tight manufacturing tolerances guarantee the best cutting performance and tool life.
- Variable tooth pitch 4.5 / 5.5 tpi with reinforced teeth (Tough Teeth).
- Maximum depth of cut for all sizes
40 mm. - Optimised coating reduces heat development.
- SPEED SLOT® − Quick removal of the drill plug by stepped recesses.
Application:
On pillar drills, lathes or hand-held power drills at the appropriate speed. For cutting circular holes from thin-walled to thick-walled material with a flat or convex workpiece surface. Suitable for all materials such as steel, stainless steel, brass, copper, cast iron, light metal, wood, plasterboard and plastic panels etc. Use of lubricant will give increased tool life (metals).
Also highly suitable for thin sheet metal bodywork.
Also highly suitable for thin sheet metal bodywork.
Recommendation:
The use of cutting oil such as No. 084205 size 0.25 extends the service life and permits more rapid progress through the material.