{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Abrasive flap sleeve (ZA) 40 grit coarse, Sleeve ⌀×Width of sleeve: 30X30mm
Article no.: 553820 30X30
Article code:
Product details
Technical Data
| Shape | cylindrical | |
| Abrasive media | zirconium abrasive (ZA) | |
| Diameter | 30 mm | |
| Abrasive media width | 30 mm | |
| Grit size (mesh) | 40 mesh | |
| Grit designation | coarse | |
| Max. speed | 19 100 min-1 | |
| Content | 1 pcs. | |
| Propulsive equipment | straight die grinder | |
| Max. recommended speed | 19 100 min-1 | |
| Grinding media backing | fabric | |
| Binding | resin and artificial resin | |
| Contents unit | pieces | |
| Type of product | abrasive sleeve | |
| Suitable for material | stainless steel; steel | |
| Material group | metal | |
| Suitable for | surface grinding; edge grinding |
Identification & Classification
| Article number | 553820 30X30 | |
| EAN / GTIN | 4045197723116 | |
| Manufacturer number | 553820 30X30 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
The band holder rubber body expands at high speed to hold the sander band in place. The full width of the band can be used, it does not slip and can be replaced quickly and easily (twist in the direction of slots when fitting/removing). Only compatible with ground sander band holders.
Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold.
Densely packed around a stable core abrasive strips of Zirconium Aluminium Oxide (ZA) fabric. Due to the even wear of the individual abrasive strips, new abrasive fabric is constantly being exposed, thus increasing the service life and material removal rate several-fold.
Application:
Sander bands are predominantly used for sanding down tasks which require the removal of large amounts of material − even at sharp edges.
For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve.
For aggressive surface grinding work as an alternative to sander bands and flap wheels. For use exclusively in the direction of rotation of the support body. The direction of rotation is marked on the core of the sleeve.
Suitable for:
Sander band holder No. 553600.