{{ name }}
Artiklové číslo {{ combinedCodeWithHighlight }}
Vaše materiálové číslo:
EAN / GTIN:
Číslo výrobce:
TK kotoučová fréza HPC TiAlN
Artiklové číslo: 185010
Vaše materiálové číslo:
- Schneidstoff: VHM
- Norm: DIN 885 A
- Typ: N
- Toleranz Nenn-⌀: ±0,1
- Eingriffsbreite ae bei Fräsoperation: Vollnut Schnitttiefe 1×D
Popis
Version:
Precision solid carbide side milling cutters in the HPC machining range.
Use as a set: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Use as a set: Cutters with the same ⌀ and same number of teeth can be combined as a set and adjusted to the required width. Since the cutters have no raised bore collar, the staggered teeth mesh with each other.
2-piece sets are particularly economical. By reversing the side milling cutters, both side edges of each cutter can be used.
Note:
- Do not clamp the cutters in a set without a sufficiently thick arbor spacer ring, otherwise the cutters will be damaged.
- See Group 30 for suitable arbor spacer rings.
- Slots milled from solid: fz for ae = 0.1×D.