{{ name }}
Codice art. {{ combinedCodeWithHighlight }}
Codice materiale:
EAN / GTIN:
Codice del produttore:
Frese per spallamenti a 90° GARANT Softcut® MTC 100/12 mm
Codice art.: 215575 100/12
Codice materiale:
- Setting angle κ: 90
- Milling application: End milling; Circular milling; Ramping
- Spacing of the cutters: unequal spacing
- Through-coolant: yes
- Machining strategy: MTC
Dettagli prodotto
Dati tecnici
| Series | Softcut® | |
| Cutting edge ⌀ DC | 100 mm | |
| Number of cutting edges Z | 12 | |
| Shank type | with bore | |
| Setting angle κ | 90 degrees | |
| Milling application | End milling; Circular milling; Ramping | |
| Spacing of the cutters | unequal spacing | |
| Through-coolant | yes | |
| Machining strategy | MTC | |
| Tool exchange | PowerCard | |
| Overall length Ltot | 50 mm | |
| Mounting bore ⌀ | 32 mm | |
| ⌀ D3 | 97 mm | |
| Circular interpolation milling ⌀ Dmin | 197 mm | |
| Circular interpolation milling ⌀ Dmax | 198 mm | |
| Circular interpolation milling ap | 2.1 mm | |
| Ramping angle αmax | 0.18 degrees | |
| Ramping length L for αmax | 94.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2.2 Nm) | |
| Type of product | End / face mill |
Codice articolo e classificazioni
| Codice articolo | 215575 100/12 | |
| EAN / GTIN | 4045197409416 |
Descrizione
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).