{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Linishing belt zirconium aluminium oxide (ZA) ZK713X, 13×457 mm, Grit: 40
Article no.: 558250 40
Copy
Article code:
Copy
- Grinding medium code: ZA
- Iron, sulphur and chlorine constituents: < 0.1
Product details
Technical Data
| Series | Tooth configuration ZK713X | |
| Grinding medium code | ZA | |
| Grit | 40 | |
| Iron, sulphur and chlorine constituents | < 0.1 % | |
| Linishing belt width | 13 mm | |
| Linishing belt length | 457 mm | |
| Type of product | Linishing belt |
Identification & Classification
| Article number |
558250 40
Copy |
|
| EAN / GTIN |
4018875042779
Copy |
|
| Manufacturer number |
704277
Copy |
|
| Manufacturer/responsible person | VSM Vereinigte Schmirgel- und Maschinen-Fabriken A, Siegmundstraße 17, 30165 HANNOVER, Germany, www.vsmabrasives.com |
Application Table
suitable for / [m/min]
35
suitable for / [m/min]
32
suitable for / [m/min]
20
suitable for / [m/min]
32
suitable for / [m/min]
25
suitable for / [m/min]
20
suitable for / [m/min]
18
suitable for / [m/min]
10
suitable for / [m/min]
30
suitable for / [m/min]
23
suitable for / [m/min]
Description
Version:
High-performance linishing belt with Zirconium Aluminium Oxide (ZA) for a high removal rate. The continuous self-sharpening characteristics of Zirconium Aluminium Oxide permit longer belt life at higher removal rates and a more consistent surface quality compared to Aluminium Oxide.
X-fabric (sturdy) for high removal rates on stationary machines.
X-fabric (sturdy) for high removal rates on stationary machines.
Application:
For use on all steels and steel alloys, cast iron, and also non-ferrous metals.
Note:
Other grit sizes, qualities, and dimensions are available on request in line with the manufacturer’s minimum order quantities. Unless specified otherwise on the order, belts will be supplied with standard joints. See No. 568526ff for spare linishing belts for burnishing machines.