{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Solid carbide milling cutter Composite, compacting cut, Diamond, ⌀ h10 DC: 4mm
Article no.: 209548 4
Copy
Article code:
Copy
- Tool material: Solid carbide
- Standard: DIN 6527
- Tolerance nominal ⌀: h10
- No. of teeth Z: 8
- Helix angle: 8
Product details
Technical Data
| Cutting edge ⌀ DC | 4 mm | |
| Coating | Diamond | |
| Tool material | Solid carbide | |
| Standard | DIN 6527 | |
| Tolerance nominal ⌀ | h10 | |
| No. of teeth Z | 8 | |
| Helix angle | 8 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HA to h6 | |
| Through-coolant | no | |
| Flute length Lc | 11 mm | |
| Overhang length L1 incl. recess | 19 mm | |
| Recess ⌀ D1 | 3.9 mm | |
| Overall length L | 57 mm | |
| Shank ⌀ Ds | 6 mm | |
| Corner chamfer width at 45° | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Feed fz for slot milling in GRP CRP | 0.021 mm | |
| Colour ring | black | |
| Type of product | End / face mill |
Identification & Classification
| Article number |
209548 4
Copy |
|
| EAN / GTIN |
4062406362379
Copy |
|
| Manufacturer number |
209548 4
Copy |
|
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
100
suitable for / [m/min]
N
ISO code:
195
suitable for / [m/min]
N
ISO code:
145
suitable for / [m/min]
N
ISO code:
145
suitable for / [m/min]
N
ISO code:
200
suitable for / [m/min]
N
ISO code:
suitable for / [m/min]
suitable for / [m/min]
suitable for / [m/min]
Description
Version:
Specifically developed Tool cutting edge has been specifically developed further for optimum machining of composite materials.
Length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.
Length similar to DIN 6527 long.
Left-hand helix, compacting cut. The material is pushed down on to the substrate. Highly suitable for thin materials.