Please note that the navigation structure of the ‘Workstations and storage and factory equipment’ section has been changed. If you had defined filters for the old categories, please check the new filters.

This article is no longer part of the assortment. If you are looking for an alternative, please note the links or get in contact with us.

Solid carbide slot drill, TiAlN, ⌀ D_C: 4mm

Article no.: 201645 4

⌀ D_C (mm):

Find similar products here:

Cutting edge ⌀ D_C		4 mm
Coating		TiAlN
Tool material		Solid carbide
Standard		DIN 6527
Type		N
Tolerance nominal ⌀		e8
No. of teeth Z		2
Helix angle		45 degrees
Direction of infeed		horizontal, oblique and vertical
Cutting width a_e for milling operation		Full slot cutting depth 1×D; 0.5×D for side milling
Shank		DIN 6535 HA to h6
Through-coolant		no
Flute length L_c		11 mm
Overhang length L₁ incl. recess		15 mm
Recess ⌀ D₁		3.8 mm
Overall length L		57 mm
Shank ⌀ D_s		6 mm
Corner chamfer width at 45°		0.1 mm
Corner chamfer angle		45 degrees
Feed f_z for slot milling in steel < 750 N/mm²		0.02 mm
Feed f_z for side milling in steel < 750 N/mm²		0.023 mm
Colour ring		green
Type of product		End / face mill

Article number		201645 4
Manufacturer number		201645 4
Manufacturer/responsible person		Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com