{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Thread insert set, 100 pieces, 1.5×D, Thread type / size: M3
Article no.: 082818 M3
Copy
Article code:
Copy
Product details
Technical Data
| Thread type | M3 | |
| Thread depth max | 1.5×D | |
| Thread pitch | 0.5 | |
| Set contents | 100 | |
| Type of product | Thread Inserts |
Identification & Classification
| Article number |
082818 M3
Copy |
|
| EAN / GTIN |
2050001671547
Copy |
|
| Manufacturer number |
41300030045/11
Copy |
|
| Manufacturer/responsible person | Böllhoff Verbindungstechnik GmbH, Archimedesstraße 1-4, 33649 BIELEFELD, Germany, www.boellhoff.com |
Description
Version:
Metric thread inserts of stainless steel wire, which resemble springs. Free-running thread, turn for turn, the drive tag is broken off at the notch (design fracture point) after installation. Optimised shape with innovative introduction zone that allows the insert to be attached and turned like a screw to insert it.
High-strength HeliCoil®plus thread inserts for through bolts, of stainless steel with high wear-resistance, low thread friction in close tolerances, high surface quality as well as corrosion and heat resistance. The flexible construction allows an even distribution of load and tension forces and thus allows creation of very high quality permanent screw connections with ideal force transfer for all working loads (static, dynamic). Uncomplicated quick insertion, resulting in an internal thread that can be used from both ends.
High-strength HeliCoil®plus thread inserts for through bolts, of stainless steel with high wear-resistance, low thread friction in close tolerances, high surface quality as well as corrosion and heat resistance. The flexible construction allows an even distribution of load and tension forces and thus allows creation of very high quality permanent screw connections with ideal force transfer for all working loads (static, dynamic). Uncomplicated quick insertion, resulting in an internal thread that can be used from both ends.
Application:
For economic repair of damaged or worn threads and as a construction element for thread reinforcement in materials which have low shear strength (e.g. aluminium, aluminium-magnesium alloys).
Note:
Self-locking inserts and inserts with other dimensions are available on request.
- For suitable plug gauges for thread checking see No. 486000 onwards.
- Self-locking inserts, inserts with other dimensions and UNC/UNF thread inserts are available on request.