{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Measuring tubes, set of 10 pieces FORM
Article no.: 097202 FORM
Article code:
Product details
Technical Data
| Sensor for gas type | Formaldehyde | |
| Measuring time 1 | 3 min | |
| Standard measuring range 1 | 0.2 ppm - 2.5 ppm | |
| Measuring time 2 | 90 s | |
| Standard measuring range 2 | 0.5 ppm - 5 ppm | |
| Type of product | Single gas detection device |
Identification numbers & Classifications
| Article number | 097202 FORM | |
| EAN / GTIN | 4026056055999 | |
| Manufacturer number | 6733081 |
Description
Version:
Each measuring tube consists of a thin glass tube melted at the ends to seal it. Inside there is a chemically reactive filling layer. To perform a measurement, break the ends off the tube and insert it into the gas detection pump. The pump compresses the air that is to be tested, which causes the filling layer to change colour when it reacts with the respective gas. The concentration can be read off on an integral scale.
Dräger tubes for measuring carbon monoxide, ammonia gas, hydrogen sulphide.
Dräger tubes for measuring carbon monoxide, ammonia gas, hydrogen sulphide.
Note:
A selection of around 300 different types of tube is available on request. These allow more than 500 substances to be measured quickly and easily, in many different concentrations.
For safety technical reasons gas detection devices cannot be returned.
For safety technical reasons gas detection devices cannot be returned.