{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 203094 12
Solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 12mm
Article no.: 203091 12
Article code:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: N
- Tolerance nominal ⌀: f8
- No. of teeth Z: 5
Product details
Technical Data
| Cutting edge ⌀ DC | 12 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | N | |
| Tolerance nominal ⌀ | f8 | |
| No. of teeth Z | 5 | |
| Helix angle | 40 degrees | |
| Helix angle characteristic | unequal spacing | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal and oblique | |
| Cutting width ae for milling operation | 0.03×D | |
| Shank | DIN 6535 HB to h6 | |
| Balance quality with shank | G 2.5 with HB | |
| Through-coolant | no | |
| Machining strategy | TPC | |
| Flute length Lc | 60 mm | |
| Overall length L | 112 mm | |
| Shank ⌀ Ds | 12 mm | |
| Corner chamfer width at 45° | 0.24 mm | |
| Corner chamfer angle | 45 degrees | |
| Average chip thickness hmax for TPC milling in Toolox 44 HRC | 0.044 mm | |
| Colour ring | green | |
| Type of product | End / face mill |
Identification numbers & Classifications
| Article number | 203091 12 | |
| EAN / GTIN | 4045197814425 | |
| Manufacturer number | 203091 12 |
Application Table
P
350
P
310
P
270
P
200
P
120
H
50
H
30
H
20
M
190
M
120
Description
Version:
High-performance end mills for general-purpose machining, specially designed for TPC applications.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Strengthened core. Offset chip breaker. Optimised bending strength due to the use of ultra-fine grain substrates.
Note:
hmax: The values stated in the table are maximum values.
ae max = 0.03×D for TPC machining.
ae max = 0.03×D for TPC machining.
Downloads & documents
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Solid carbide milling cutter with chip separators TPC, TiAlN, ⌀ f8 DC: 12mm |
on request
In stock
38 pieces in stock
BGN 454.33
plus VAT at the current rate
Prices plus delivery costs
|
on request
In stock
126 pieces in stock
BGN 299.14
plus VAT at the current rate
Prices plus delivery costs
|
|
| Corner chamfer angle | 45 degrees | 45 degrees | 45 degrees |
| Cutting edge ⌀ DC | 12 mm | 12 mm | 12 mm |
| Flute length Lc | 60 mm | 60 mm | 60 mm |
| Tool material | Solid carbide | Solid carbide | Solid carbide |
| Type | N | N | N |
| Corner chamfer width at 45° | 0.24 mm | 0.24 mm | 0.2 mm |
| Shank ⌀ Ds | 12 mm | 12 mm | 12 mm |