Article no.: 179700 250X32M

Carbide-tipped circular saw blade Rake angle negative 250X32M mm

    • No price available
on request
Subsequent delivery
0 pieces in stock
Brand: GARANT
Tool material: Carbide
Components: Carbide

Information

  • Tool material: Carbide
  • Components: Carbide

Technical Data

250 mm
Thickness 3.2 mm
Tool material Carbide
Bore ⌀ 32 mm
No. of teeth Z 60
Pitch t 13.1 mm
Number of drive holes 2
Drive hole ⌀ 11 mm
Drive hole pitch circle 63 mm
suitable for saw makes Kaltenbach
Components Carbide
Type of product Circular saw blade
Article number 179700 250X32M
EAN / GTIN 4045197096111

Description

Version:

High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.

Advantage:

Particularly suitable for hard anodised profile material.

Application:

On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.

Note:

  • Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, or bronze it is preferable to use the lowest recommended speed.
  • Pay special attention to maintaining an even feed rate; this prevents damage.
  • Additional versions on request.
  • Further circular saw blades can be found in catalogue volume 2.

Application Table

Aluminium (short chipping)
N
850
Alu > 10% Si
N
650
CuZn
N
450
wet minimum
 
dry
 
Air
 

Create new article code

Change article code

By means of article codes you can record your internal item numbers in the eShop.

Share this product

or copy this link

Add to shopping list

Select article variation and quantity

⌀×bore (mm) Unit price incl. VAT
To shopping cart