{{ name }}
Réf. {{ combinedCodeWithHighlight }}
Référence:
EAN / GTIN:
Réf. fabricant:
Lame de scie circulaire en carbure Angle de coupe négatif 250X32M mm
Réf.: 179700 250X32M
Référence:
- Type d'outils: Carbure
- Garnissage: Carbure
Détails du produit
Caractéristiques techniques
| ⌀ | 250 mm | |
| Epaisseur | 3,2 mm | |
| Type d'outils | Carbure | |
| ⌀ alésage | 32 mm | |
| Nombre de dents Z | 60 | |
| Pas t | 13,1 mm | |
| Nombre d'alésages d'entraînement | 2 | |
| ⌀ alésage d'entraînement | 11 mm | |
| Alésage d'entraînement du cercle primitif | 63 mm | |
| Convient pour machine | Kaltenbach | |
| Garnissage | Carbure | |
| Arrosage interne | non | |
| Type de produit | Lames de scies circulaires |
Numéros d’identification et classifications
| Référence article | 179700 250X32M | |
| EAN / GTIN | 4045197096111 |
Tableau d’application
N
850
N
650
N
450
Description
Version:
High performance toothing with high teeth and lower finishing teeth. The trapezoidal carbide tips cut easily and generate clean cut surfaces.
Advantage:
Particularly suitable for hard anodised profile material.
Application:
On high-speed machines.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.
F = fine tooth pitch for thin walled profiles or plates up to 5 mm thickness.
M = medium tooth pitch for profiles and pipes with greater than 5 mm thickness.
G = coarse tooth pitch for solid material such as bars and rods.
Negative rake angle 6° for use on machines with oscillating saw blade infeed from above. Advantageous for thin profiles.
Note:
- Recommended cutting speed: 40 − 80 m/s, for harder materials such as alloys, brass, or bronze it is preferable to use the lowest recommended speed.
- Pay special attention to maintaining an even feed rate; this prevents damage.
- Additional versions on request.
- Further circular saw blades can be found in catalogue volume 2.