{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
GARANT Softcut® hoekfrees 90° MTC 18/2 mm
Artikelnummer: 215565 18/2
Klantartikelnummer:
- Instelhoek κ: 90
- Freestoepassing: Hoekfrezen; Circulair frezen; Ramping
- Verdeling van de snijkanten: ongelijk
- Inwendige koeling: ja
- Verspaningsstrategie: MTC
Productdetails
Technische gegevens
| Series | Softcut® | |
| Cutting edge ⌀ DC | 18 mm | |
| Number of cutting edges Z | 2 | |
| Schachtuitvoering | Cilinderschacht | |
| Instelhoek κ | 90 graden | |
| Freestoepassing | Hoekfrezen; Circulair frezen; Ramping | |
| Verdeling van de snijkanten | ongelijk | |
| Inwendige koeling | ja | |
| Verspaningsstrategie | MTC | |
| Gereedschapswissel | PowerCard | |
| Overhang L1 | 30 mm | |
| Overall length Ltot | 140 mm | |
| Shank ⌀ Ds h6 | 16 mm | |
| ⌀ D3 | 15 mm | |
| Circular interpolation milling ⌀ Dmin | 33 mm | |
| Circular interpolation milling ⌀ Dmax | 34 mm | |
| Circular interpolation milling ap | 1.7 mm | |
| Ramping angle αmax | 1.38 degrees | |
| Ramping length L for αmax | 12.5 mm | |
| suitable indexable insert | AP.. 1335.. | |
| Pack of insert screws | 219826 (8IP; 2,2 Nm) | |
| Producttype | Hoekfrezen |
Identificatienummers en classificaties
| Artikelnummer | 215565 18/2 | |
| EAN/GTIN | 4045197708052 |
Omschrijving
Version:
High precision indexable shoulder mill with irregular pitch for very smooth cutting, very high precision, and very high metal removal rate. New generation of high performance indexable shoulder mills with special geometry for reduced cutting forces for MTC applications under unstable conditions or for spindles with low drive power.
Application:
For shoulder milling to large depths, also slotting. General use in all steels including stainless steels.
Spare part:
Pack of insert screws No. 219826 (8IP; 2.2 Nm).