{{ name }}
Artikelnummer {{ combinedCodeWithHighlight }}
Klantartikelnummer:
EAN/GTIN:
Nummer fabrikant:
VHM-NC-machineruimer configureerbaar 4 mm
Artikelnummer: 164344 4
Klantartikelnummer:
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
Even aantal tanden met ongelijke steek – twee tanden liggen steeds precies tegenover elkaar; bijv. tand 1 en 5.
Klik om de afbeelding te vergroten
De juiste ondermaat voor de voorboring vindt u in het verspaningshandboek.
Klik om de afbeelding te vergroten
Klik om de afbeelding te vergroten
- Tool material: Solid carbide
- Standard: DIN 8093
- Through-coolant: no
- Shank: DIN 6535 HA to h6
- Application for type of drilling: for through hole
Productdetails
Technische gegevens
| Nominal ⌀ DC | 4 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 8093 | |
| Through-coolant | no | |
| Shank | DIN 6535 HA to h6 | |
| Application for type of drilling | for through hole | |
| ⌀ range | 3,760 mm - 4,090 mm | |
| Flute length Lc | 19 mm | |
| Overhang L1 | 45 mm | |
| Overall length L | 75 mm | |
| Number of cutting edges Z | 6 | |
| Shank ⌀ Ds | 4 mm | |
| Feed f in steel < 1100 N/mm2 | 0,12 mm/rev. | |
| Reaming oversize in diameter | 0,05 mm - 0,1 mm | |
| Shank tolerance | h6 | |
| Colour ring | green | |
| Type of product | Phillips bit |
Identificatienummers en classificaties
| Artikelnummer | 164344 4 | |
| EAN/GTIN | 4045197854506 |
Toepassingstabel
N
35
N
30
N
25
P
30
P
25
P
20
P
15
P
10
M
15
M
12
S
10
K
10
N
25
Omschrijving
Version:
Version suitable for NC DIN 8093-2 with straight shank ⌀ for standard chucking especially in hydraulic chucks or high precision collet chucks. This ensures very high concentricity and process reliability,
The use of GARANT-NC reamers eliminates the need to procure special collets. With long flutes and left-hand helix.
Reamers finish ground to match your specification.
The use of GARANT-NC reamers eliminates the need to procure special collets. With long flutes and left-hand helix.
Reamers finish ground to match your specification.
Application:
For reaming through holes, as the chips are evacuated in the cutting direction. Lead taper is suitable also for blind holes.