{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Bench centre with ground measuring faces, without dial indicator 100 mm
Article no.: 443000 100
Article code:
Product details
Technical Data
| Lateral and vertical alignment of tailstocks | ±0.01 mm | |
| Tip height | 100 mm | |
| Maximum clear span between centres | 450 mm | |
| Centre ⌀ | 22 mm | |
| Column ⌀ | 22 mm | |
| Pillar height | 200 mm | |
| Cross arm ⌀ | 16 mm | |
| Cross arm length | 125 mm | |
| overall height without stand | 200 mm | |
| T-slot width H7 | 12 mm | |
| Footprint length | 700 mm | |
| Baseplate width | 180 mm | |
| maximum load capacity per pair | 20 kg | |
| Weight | 35 kg | |
| Type of product | Radial and axial run-out tester |
Identification numbers & Classifications
| Article number | 443000 100 | |
| EAN / GTIN | 4030234000183 |
Description
Version:
Measuring stand:
With fine setting adjustment and holder bore 8 H7. The cross arm is full adjustable for height and in all lateral directions.
Tailstocks:
adjustable. Left tailstock with fixed centre, right tailstock with axially movable quill.
Measuring bench:
Precision ground, with 2 T-slots. To take the tailstocks (tolerance H7) or the stand.
Flatness to DIN 876/1.
With fine setting adjustment and holder bore 8 H7. The cross arm is full adjustable for height and in all lateral directions.
Tailstocks:
adjustable. Left tailstock with fixed centre, right tailstock with axially movable quill.
Measuring bench:
Precision ground, with 2 T-slots. To take the tailstocks (tolerance H7) or the stand.
Flatness to DIN 876/1.
Application:
For measuring round and plane accuracy as well as for comparative tests of parallelism and diameter.
Supplied with:
Bench, measuring stand.
Tailstocks without Vee blocks.