{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Pull stud, 18CrNiMo7, Form A with bore 40 GARANT
Número de artículo: 308605 40
Código del artículo:
- Pull stud standard: ISO 7388-3
Detalles de producto
Datos técnicos
| suitable for steep tapers | 40 | |
| Hole characteristics | with bore | |
| Pull stud standard | ISO 7388-3 | |
| Collar ⌀ D | 23 mm | |
| Head ⌀ D1 | 19 mm | |
| Overall length L | 54 mm | |
| L1 | 26 mm | |
| Thread M | M16 | |
| Angle A | 15 degrees | |
| maximum tightening torque | 50 Nm | |
| suitable for taper arbors with colour code | SK 40 | |
| Width across flats | 19 mm | |
| Type of product | Pull Stud |
Números de identificación y clasificaciones
| Número de artículo | 308605 40 | |
| EAN / GTIN | 4045197554529 |
Descripción
Description:
The toolholder is securely pulled into the spindle by the spindle’s clamping gripper using the pull stud. Pull studs come in different versions. They are an important link between the machine and tool. Stringent requirements apply for the accuracy, strength and reliability of pull studs.
Application:
- For tools with taper shanks see also DIN 69871 and JIS B 6339 (MAS-BT).
- In machining centres (machines with automatic tool changers).
- In NC machines (machines without automatic tool changers).
Note:
When installing the pull stud, cheque the correct tightening torque.
ISO 7388-3 meets the old standard DIN 69872.
ISO 7388-3 meets the old standard DIN 69872.
Descargas y documentos
Compare with similar products
This article |
Recommendations |
||
|---|---|---|---|
Pull stud, 18CrNiMo7, Form A with bore 40 GARANT
a petición
En stock
2,593 piezas en stock
13,63 €
más IVA en la tarifa actual
Gastos de envío no incluidos
|
a petición
En stock
8,251 piezas en stock
11,85 €
más IVA en la tarifa actual
Gastos de envío no incluidos
|
a petición
En stock
3,070 piezas en stock
10,47 €
más IVA en la tarifa actual
Gastos de envío no incluidos
|
|
| Collar ⌀ D | 23 | 23 | 23 |
| Overall length L | 54 | 54 | 54 |
| Thread M | M16 | M16 | M16 |
| L1 | 26 | 26 | 26 |
| maximum tightening torque | 50 | 50 | 50 |
| suitable for steep tapers | 40 | 40 | 40 |
| Hole characteristics | with bore | with bore | with bore |