{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
Microfresa de MDI GARANT Diabolo 0,5X6 mm
Número de artículo: 201631 0,5X6
Código del artículo:
- Material de corte: MDI
- Norma: Norma de fábrica
- Tipo: H
- Tolerance nominal ⌀: 0 / −0,005
- No. of teeth Z: 2
Detalles de producto
Datos técnicos
| Serie | Diabolo | |
| Cutting edge ⌀ DC | 0.5 mm | |
| Recubrimiento | TiAlN | |
| Material de corte | MDI | |
| Norma | Norma de fábrica | |
| Tipo | H | |
| Tolerance nominal ⌀ | 0 / −0,005 | |
| No. of teeth Z | 2 | |
| Helix angle | 25 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Anchura de ataque ae en la operación de fresado | Ranura completa profundidad de corte 1×D; 0,1×D al contornear | |
| Shank | DIN 6535 HA to h5 | |
| Refrigeración interior | no | |
| Flute length Lc | 0.7 mm | |
| Overhang length L1 incl. recess | 6 mm | |
| Recess ⌀ D1 | 0.48 mm | |
| Overall length L | 45 mm | |
| Shank ⌀ Ds | 4 mm | |
| Corner chamfer angle | 90 degrees | |
| Feed fz for slot milling in steel < 65 HRC | 0.008 mm | |
| Feed fz for side milling in steel < 65 HRC | 0.012 mm | |
| Cutting speed vc in steel < 65 HRC | 30 m/min | |
| Correction factor ap corr | 0.35 | |
| anillo de color | rojo | |
| Tipo de producto | Fresa angular |
Números de identificación y clasificaciones
| Número de artículo | 201631 0,5X6 | |
| EAN / GTIN | 4045197932532 |
Tablas de Aplicación
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Descripción
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z