{{ name }}
Número de artículo {{ combinedCodeWithHighlight }}
Código del artículo:
EAN / GTIN:
Número del fabricante:
GARANT Diabolo VHM-Microfräser 0,1X1 mm
Número de artículo: 201631 0,1X1
Código del artículo:
- Tool material: Solid carbide
- Standard: Manufacturer’s standard
- Type: H
- Tolerancia menovitého ⌀: 0 / −0,005
- Počet zubov Z: 2
Detalles de producto
Datos técnicos
| Series | Diabolo | |
| ⌀ rezných hrán DC | 0,1 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | Manufacturer’s standard | |
| Type | H | |
| Tolerancia menovitého ⌀ | 0 / −0,005 | |
| Počet zubov Z | 2 | |
| Uhol sklonu zubov | 25 Stupeň | |
| Smer podávania | horizontal, oblique and vertical | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D; 0.1×D for side milling | |
| Stopka | DIN 6535 HA to h5 | |
| Through-coolant | no | |
| Dĺžka britov Lc | 0,15 mm | |
| Dĺžka výčnelku L1 vrát. vôle | 1 mm | |
| ⌀ vôle D1 | 0,08 mm | |
| Celková dĺžka L | 45 mm | |
| ⌀ stopky Ds | 4 mm | |
| Rohový uhol úkosu | 90 Stupeň | |
| Posuv fz pre drážkovacie frézy v oceli < 65 HRC | 0,003 mm | |
| Posuv fz pre orezávanie v oceli < 65 HRC | 0,005 mm | |
| Faktor korekcie ap korr | 0,5 | |
| Colour ring | red | |
| Type of product | End / face mill |
Números de identificación y clasificaciones
| Número de artículo | 201631 0,1X1 | |
| EAN / GTIN | 4045197932310 |
Tablas de Aplicación
P
200
P
200
P
190
P
170
H
120
H
100
H
72
H
55
H
50
H
45
M
90
M
80
N
140
Descripción
Version:
GARANT Diabolo:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
Special geometry, coating and carbide for hard machining in the high-performance field. Suitable even for machining electrolytic copper. Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
Tolerances:
- Neck ⌀: D1 = 0 / -0.01 mm.
Note:
At greater tool overhang lengths, use a reduced value for ap!
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z
Values for:
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z