Version:
- With minimum length adjustment (MLA), by means of a damping element.
- Increases tool life of taps by up to 300 %.
- Internal coolant supply up to 50 bar.
- Secure clamping for ER collets in quick-change tapping collets.
- Run-out of shank taper to the tapping collet taper < 3 µm.
Application:
On
machining centres with synchronised spindles.- For compensating the difference in pitch between tap/synchronised spindle.
- For compensating the pitch tolerances of taps.
Optional extras:
ER collets, see No.
308881-
309240 (size ER11 / 16 / 25). ER tapping collets with square drive spigot, see No.
309399 -
309413 (Size ER 11 /16 / 25).
Quick-change tapping collets and extensions, see No.
338120 –
338142.
See No.
308600 -
308806 for pull studs.
Coolant feed pipes for HSK, see No.
309880.
Plug-in sockets for HSK, see No.
309890.
Note:
Maximum speed 4000 rpm.