Version:
Groove width gauges with “Go” and “No Go” end. “Go” end with wear allowance to DIN 7164. Gauge body of hardened steel.
For intermediate sizes or numerical tolerances.
Application:
For checking flat fits, e.g. grooves.
Standard:
Tolerances and dimensions to DIN 1938-1, DIN 2245-1 and DIN 7163.
Note:
The size designation type describes the nominal dimension in millimetres (mm).
Type A = 3.001 – 5.999
Type B = 6.001 – 8.999
Type C = 9.001 – 12.999
Type D = 13.001 – 16.999
Type E = 17.001 – 20.999
Type F = 21.001 – 25.999
Example: 15.8 m6 or 41.04 + 0.01 / – 0.02.