Special geometry, coating and carbide for hard machining in the high-performance field.
Suitable even for machining electrolytic copper.
Double-relief ground 2 chamfers hollow ground for high-precision hard machining.
Recess angle α = 16°.
- Neck ⌀: D1 = 0 / -0.01 mm.
At greater tool overhang lengths, use a reduced value for ap!
slots milled from solid: ap = 0.05×D×ap korr
side milling: ap = 0.1×D×ap korr
To calculate the feed rate vf please use the actual speed of the machine (the maximum possible speed)! e.g: vf = 18000 [rpm]× fz [mm/Z]× z