{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
GARANT Diabolo solid carbide HPC drill, Weldon shank DIN 6535 HB, TiAlN, ⌀ DC h7: 10,8mm
Article no.: 122362 10,8
Article code:
Click to enlarge image
Weldon shank DIN 6535 HB
Click to enlarge image
Click to enlarge image
Click to enlarge image
- Tool material: Solid carbide
- Standard: DIN 6537 K
- Version: 4×D
- Type: H
- Tolerance nominal ⌀: h7
Product details
Technical Data
| Series | Diabolo | |
| Nominal ⌀ DC | 10.8 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 6537 K | |
| Version | 4×D | |
| Type | H | |
| Tolerance nominal ⌀ | h7 | |
| Number of cutting edges Z | 2 | |
| Point angle | 140 degrees | |
| recommended maximum drilling depth L2 | 38.8 mm | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| Machining strategy | HPC | |
| Semi-Standard | yes | |
| Flute length Lc | 55 mm | |
| Overall length L | 102 mm | |
| Shank ⌀ Ds | 12 mm | |
| Feed f in steel < 60 HRC | 0.11 mm/rev. | |
| Colour ring | red | |
| Type of product | Jobber drill |
Identification numbers & Classifications
| Article number | 122362 10,8 | |
| EAN / GTIN | 4045197971227 | |
| Manufacturer number | 122362 10,8 |
Application Table
P
90
P
80
P
70
P
65
P
55
H
28
H
16
H
14
H
10
H
30
H
28
H
28
K
70
Description
Version:
Cutting chisel edge with high centring accuracy due to strong core and special point geometry. Convex major cutting edges with defined honed edge ensure the drill has high stability and maximum load capacity.
Special multi-nano layer coating for drilling in hardened steels.
Special multi-nano layer coating for drilling in hardened steels.
Note:
Flute length LC = L2 + 1.5 × DC.
Downloads & documents
Compare with similar products
This article |
Recommendations |
|||
|---|---|---|---|---|
|
GARANT Diabolo solid carbide HPC drill, Weldon shank DIN 6535 HB, TiAlN, ⌀ DC h7: 10,8mm |
||||
| Version | 4×D | 4×D | 4×D | 4×D |
| Colour ring | red | without | green | blue |
| Overall length L | 102 mm | 102 mm | 102 mm | 102 mm |
| Nominal ⌀ DC | 10.8 mm | 10.8 mm | 10.8 mm | 10.8 mm |
| Standard | DIN 6537 K | DIN 6537 K | DIN 6537 K | DIN 6537 K |
| Shank | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 | DIN 6535 HB to h6 |
| Tolerance nominal ⌀ | h7 | h7 | h7 | m7 |