{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 132741 M10
Machine tap for synchronised spindles HSS-E-PM IC / Form B 6HX M10
Article no.: 132745 M10
Article code:
- Thread type: M
- Flank angle: 60
- Tool material: HSS E PM
- Standard: Manufacturer’s standard
- Thread standard: DIN 13
Product details
Technical Data
| Thread size | M10 | |
| Coating | TiAlN | |
| Thread type | M | |
| Flank angle | 60 degrees | |
| Tool material | HSS E PM | |
| Standard | Manufacturer’s standard | |
| Thread standard | DIN 13 | |
| Tolerance class | ISO 2X 6HX | |
| Taper lead form | B | |
| Shank | DIN 1835 B with h6 | |
| Through-coolant | yes | |
| Application for type of drilling | up to 3×D for through holes | |
| Cutting direction | right-hand | |
| Thread pitch | 1.5 mm | |
| Overall length L | 100 mm | |
| Shank ⌀ Ds | 10 mm | |
| Shank square □ | 8 mm | |
| Tapping hole ⌀ | 8.5 mm | |
| Thread ⌀ | 10 mm | |
| Shank tolerance | h6 | |
| Type of threading tool | Maskinsnittapper til synkron bearbejdning | |
| Number of clamping slots | 3 | |
| Colour ring | green | |
| Number of cutting edges Z | 3 | |
| Thread depth | 30 mm | |
| Type of product | Tap |
Identification numbers & Classifications
| Article number | 132745 M10 |
Application Table
N
40
N
40
P
37
P
35
P
22
P
12
P
7
M
12
M
10
N
35
Description
Version:
Sturdy version with lead-in taper and shank to DIN 1835-B.Special geometry for general-purpose use on machines with synchronised spindle drive. The tap is controlled by the synchronising spindle of the machine.
Special TiAlN coating for optimum tool life.
Can be used with emulsion (fat content minimum 8%).
Withinternal coolant feed for maximum tool life.
Special TiAlN coating for optimum tool life.
Can be used with emulsion (fat content minimum 8%).
Withinternal coolant feed for maximum tool life.