{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Alternative article:
-
Article no.: 208024 13,5X3
Solid carbide Woodruff keyseating cutter 13,5X3 mm
Article no.: 208025 13,5X3
Article code:
- Tool material: Solid carbide
- Standard: DIN 850 D/F
- Milling profile: staggered teeth
- Type: N
- Tolerance nominal ⌀: e8
Product details
Technical Data
| Cutting edge ⌀ DC | 13.5 mm | |
| Flute length Lc | 3 mm | |
| Coating | TiAlN | |
| Tool material | Solid carbide | |
| Standard | DIN 850 D/F | |
| Milling profile | staggered teeth | |
| Type | N | |
| Tolerance nominal ⌀ | e8 | |
| No. of teeth Z | 8 | |
| Direction of infeed | horizontal | |
| Cutting width ae for milling operation | Full slot cutting depth 1×D | |
| Shank | DIN 6535 HB to h6 | |
| Through-coolant | no | |
| for Woodruff keyways to DIN 6888 | 3.0×5.0 mm | |
| Recess ⌀ D1 | 4.6 mm | |
| Overall length L | 56 mm | |
| Shank ⌀ Ds | 10 mm | |
| Feed fz for slot milling in steel < 900 N/mm2 | 0.035 mm | |
| Shank tolerance | h6 | |
| Corner chamfer angle | 90 degrees | |
| Colour ring | green | |
| Type of product | Slot milling cutter |
Identification numbers & Classifications
| Article number | 208025 13,5X3 |
Application Table
P
70
P
67
P
65
P
63
P
60
M
40
Description
Version:
Peripheral cutting, alternate set teeth (staggered). The sides of the teeth are ground to give clearance and thus cannot jam in the component.
Note:
For milling Woodruff keyways to DIN 6888 or for milling small slots.
Slot milled from solid: fz for ap = 0.25×D.
Slot milled from solid: fz for ap = 0.25×D.