{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Carbide-tipped hammer drill SDS-plus 20X300 mm
Article no.: 789000 20X300
Article code:
- Tool material: Carbide
- Use with impact / without impact: Impact drilling
- Shank: SDS Plus
Product details
Technical Data
| ⌀ | 20 mm | |
| overall length | 300 mm | |
| Flute length | 250 mm | |
| Tool material | Carbide | |
| Use with impact / without impact | Impact drilling | |
| Shank | SDS Plus | |
| Number of cutting edges Z | 2 | |
| Type of product | Masonry drill |
Identification numbers & Classifications
| Article number | 789000 20X300 | |
| EAN / GTIN | 4002395356126 | |
| Manufacturer number | 4932399027 |
Description
Version:
The 3 special Power Breaker projecting teeth of the M2 generate micro-cracks in the material being drilled, these promote quicker advance by the drill and faster removal of material. The high quality carbide tip with particularly strong brazed joint guarantees long tool life, even in reinforced concrete. The reinforced core flutes (KVS) are vibration-damping, so the impact energy is transmitted directly to the drilling tip.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using extra long drills (> 500 mm), first drill a pilot hole with a shorter drill of the same diameter (prevents bending and breakage).