{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Deburring wheel brush Steel wire 0.35 mm 250X60 mm
Article no.: 570505 250X60
Article code:
Click to enlarge image
Click to enlarge image
Excessive pressure
Click to enlarge image
Correct pressure
Click to enlarge image
Product details
Technical Data
| Brush material | Steel wire | |
| Brush ⌀ D1 | 250 mm | |
| Brush width | 58 mm | |
| Bristle thickness | 0.35 mm | |
| Length of brush section H1 | 50 mm | |
| Propulsive equipment | Bench deburrer | |
| maximum speed | 3,600 min-1 | |
| Type of product | Wheel brush |
Identification numbers & Classifications
| Article number | 570505 250X60 | |
| EAN / GTIN | 4067263906551 |
Description
Version:
Bore diameter 50.8 mm with double keyway 13×7. Other bore diameters available.
Waved high-tensile steel wire.
Waved high-tensile steel wire.
Application:
For all popular bench deburring machines. Particularly long working life due to special wire.
Ideally suited for economical deburring of flat strips, profiles, pipes, fittings, plastic parts, and the like.
Keyway 13.5×7.6.
Ideally suited for economical deburring of flat strips, profiles, pipes, fittings, plastic parts, and the like.
Keyway 13.5×7.6.
Note:
Only the tips of the bristles act on the workpiece. Applying too much contact pressure will not improve the result, but will increase the required drive power and reduce the working life of the brush.